Show Warnings
2
Enlarge Print Area
2-40
Imaging Settings
On
*
, Off
This setting specifies the action to be taken if an error associated with printing an
image occurs on the machine.
If [On] is selected, the print job is canceled, and an error message is displayed.
If [Off] is selected, an error message is not displayed, and the print job is
processed as is.
NOTE
Depending on the error, an error message may be displayed even if [Off] is
selected.
Off
*
, On
This setting specifies whether to enlarge the valid printable area on the paper.
If [Off] is selected, the printable area is 1/5" (5 mm) from the top, bottom, left and
right edges of the specified paper size.
If [On] is selected, the printable area is 1/10" (2.5 mm) from the top, bottom, left
and right edges of the specified paper size.
5 mm
5 mm
5 mm
'Off'
Printable area
2.5 mm
5 mm
2.5 mm
'On'
2.5 mm
2.5 mm