Step 3: Setting The Switches - LANCAST twister 2111-12-01 Installation & User Manual

3
Does not apply to the "twister" 2111-12 (BNC).
*
8 Installation Guide
Set the Switches.
Link Loss Carry Forward (LLCF) Switch.
The 2111 media converter incorporates Link Loss Carry
Forward (LLCF) functionality as an aid in troubleshooting a
remote connection.
A switch for enabling/disabling LLCF is located on the rear
panel of the converter. When LLCF is enabled, the fiber optic
ports as well as the twisted-pair ports on the "twister" media
converter do not transmit a link signal until they receive a link
signal from the opposite port. Refer to the page titled Link Loss
Carry Forward in the User Guide section of this manual for
more detailed information.
The unit is shipped with the LLCF disabled. To re-set the LLCF,
simply slide the switch to the appropriate setting.
OFF ON
LLCF
LLCF Switch
(default is OFF)
*
PWR
DC INPUT/5VDC