Step 5: Applying Power - LANCAST twister 2111-12-01 Installation & User Manual

5
Apply power.
Power is provided to the "twister" unit from the desktop power
supply module. This power module is equipped with a S760
hollow-type plug for insertion into the DC jack located on the
back of the "twister" unit and standard IEC 320-type AC power
receptacle. Refer to page 5 for a listing of models using the
90-250V universal desktop power supply and the 115V domestic
desktop power supply.
When making power connections, it is recommended that the
DC power cord be connected to the DC input jack located on the
back of the "twister" media converter before making the AC
connection to the outlet. Be sure to seat the power cord into the
strain relief clip to ensure against accidental disconnection.
Strain Relief Clip
PWR
OFF ON
LLCF
DC INPUT/5VDC
14 Installation Guide