Bnc - LANCAST twister 2111-12-01 Installation & User Manual

12 Installation Guide
When making fiber optic connections, be sure that the transmit
(TX) port of the "twister" connects to the receive (RX) port of
the connected device; and be sure that the transmit (TX) port of
the connected device connects to the receive (RX) port of the
"twister" unit.
Once power is applied to the unit, correct connectivity can be
verified via the LK (Link) LED.
BNC Connection (2111-12).
The "twister" 2111-12 attaches to thinnet coaxial cable via a
standard BNC connector and supports a maximum segment
length of 185 meters. The "twister" 2111-12 is shipped from the
factory with the termination disabled. Use the unit in a daisy-
chain configuration or use a T-connector for proper termination.
10BASE-2
®
"twister"
10BASE-T
COL PWR
AT
™
2111
LK