Step 4: Connecting To The Network; Twisted-Pair - LANCAST twister 2111-12-01 Installation & User Manual

4
10 Installation Guide
Connect to the network.
The Lancast "twister" 2111 media converter offers the ease of
plug-and-play installation. Please refer to the appropriate
section below for more information and guidelines regarding
specific network connections.
Twisted-pair Connections (all models).
The "twister" 2111 provides one shielded RJ-45 connector for
Category 3, 4 or 5 twisted-pair segments and supports a
maximum link length of 100 meters.
NOTE: Be sure you have set the MDI- II to MDI-X switch
located on the bottom of the unit to the proper configuration.
Refer back to STEP 3 if necessary.
Once power is applied to the unit, correct connectivity can be
verified via the LK (link) LED.
10BASE-FL
TX
SM
10BASE-FL
TX
SM
®
™
"twister"
10BASE-T
LK LK PWR
RX
AT AT
®
™
"twister"
10BASE-T
LK LK PWR
RX
AT AT
2111
2111