Installation Guide; Step 1: Unpacking The "Twister" And Accessories; Step 2: Choosing An Appropriate Location - LANCAST twister 2111-12-01 Installation & User Manual

Installation Guide

Follow the simple steps outlined in this section of the guide to
install and start using your Lancast "twister" media converter.
Unpack the "twister" and any accessories.
1
Check that the following components have been included with
your order:
• "twister" 2111 media converter
• Power Supply
• Power Cord
• Four (4) Rubber Feet
Your order has been provided with the safest possible packaging,
but shipping damage does occasionally occur. Inspect your order
carefully. If you discover any shipping damage, notify the carrier
and follow their instructions for damage and claims. Save the
original shipping carton if return or storage of the unit is necessary.
2 Choose an appropriate location.
The "twister" 2111 media converter is intended for use in either
office or industrial environments. The unit must be located within
six (6) feet of the AC power source being used and placed as far
away as possible from electrical noise generating equipment such
as copiers, electrostatic printers and other motorized equipment. If
exposed twisted-pair wiring is used nearby, the wiring should be
routed as far away as possible from power cords and data cables
to minimize interference.
The units may be oriented in any manner which permits the user
to make physical connection to the power supply and leaves a
minimum of six (6) inches of space for proper ventilation.
TUV Compliance Note. For pluggable equipment, the socket outlet
must be installed near the equipment and be easily accessible.
Bei Geräten mit Steckanschluß muß die Steckdose nahe dem Gerät
angebracht und leicht zugänglich sein.
"twister" 2111 Media Converter 7