Installation; General - Hatco FLOWMAX FM2SS-7 Series Installation And Operating Manual

INSTALLATION

General

FLOWMAX Coffee and Tea Brewers are shipped from the
factory with most components assembled and ready for use.
Care should be taken when unpacking shipping carton to avoid
damage to unit and the components enclosed.
WARNING
ELECTRIC ShOCK hAzARD: Unit is not weatherproof.
Locate unit indoors where ambient air temperature is a
minimum of 21°C (70°F).
CAUTION
Locate unit at the proper counter height in an area that is
convenient for use. The location should be level to prevent
the unit or its contents from falling accidentally and strong
enough to support the weight of the unit and contents.
Pumping Tube
Assembly
Stainless Steel Tank
Cover Lock
(Unlocked Positioned)
Liquid Level Tube
Dispenser Handle
Control Panel
1. Remove the unit from the carton.
2. Remove the information packet.
3. Remove tape and protective packaging from all surfaces
of the unit and any accessories.
4. Turn the unit upright and place the unit in the desired
location.
• Locate the unit in an area where the ambient air
temperature is constant and a minimum of 21° C
(70° F).
• Make sure the unit is at the proper counter height in an
area convenient for use.
• Make sure the countertop is level and strong enough to
support the weight of the unit and contents.
• Make sure all the feet on the bottom of the unit are
positioned securely on the countertop.
NOTE: The unit must be transported in the upright position.
Flip-Down Handle
Figure 5. FM2SS-7 Components
6
English
Cover
Spreader Cover
Coffee/Tea Basket
Form No. FM2SSM_CN-0810