Power Connector; Pocl Power Over Camera Link - Teledyne Linea User Manual

20
Clocking Signal
LVAL (high)
DVAL
STROBE (rising ed ge)
FVAL

Power Connector

WARN IN G: It is extrem ely im p ortant that you ap p ly the a p p rop riate voltages to you r cam era.
!
In correct voltages m ay d am age the cam era. Inp u t voltage requ irem ent: +5 VDC to +24 VDC, 1
Am p . Before connecting p ow er to the cam era, test all p ow er su p p lies.
The cam era requ ires a single voltage inp u t +5 VDC to +24 VDC. The cam era m eets all p erform ance
sp ecifications u sing stand ard sw itching p ow er su p p lies, althou gh w ell-regu lated linear su p p lies p rovid e
op tim u m p erform ance.
WARNING: When setting up the camera's power supplies follow these guidelines:

Ap p ly the ap p rop riate voltages.

! Protect the cam era w ith a 2 am p slow -blow fu se betw een the p ow er su p p ly and the cam era.

Do not u se the shield on a m u lti-cond u ctor cable for grou nd .

Keep lead s as short as p ossible in ord er to red u ce voltage d rop .

Use high-qu ality su p p lies in ord er to m inim ize noise.
If your power supply does not meet these requirements, then the camera performance specifications are not
Note:
guaranteed.

PoCL Power Over Camera Link

The Linea 2K and 4K Cam era Link cam eras are PoCL com p atible, bu t not com p liant w ith the fu ll PoCL
sp ecification as their op eration is d ep end ent on the fram e grabber u sed . These cam eras exceed the 4 W
PoCL p ow er sp ecification by 0.35 W, bu t som e fram e grabbers, su ch as the Xtiu m fram e grabber from
Teled yne Dalsa, are able to su p p ly su fficient p ow er for the cam era 's op eration .
PoCL can be enabled from w ithin Cam Exp ert. Be su re to connect the p ow er su p p ly to the Xtiu m fram e
gabber in the PC.
03-032-20206-00
Indicates
Ou tp u tting valid line
N ot u sed
Valid d ata
Set to 0
Figure 6: 6-pin Hirose Circular Male Power Plug—Power Connector
Table 8. Power Plug Pinout
Pin Description
1 +5 V to +24 V DC
2 +5 V to +24 V DC
3 +5 V to +24 V DC
Linea 2K and 4K Monochrome Line Scan Camera User's Manual
Pin Description
4 GN D
5 GN D
6 GN D
Teledyne DALSA