Troubleshooting Device Connections - D-Link DGS-3100 SERIES Hardware Installation Manual

DGS-3100 Series Gigabit Stackable Managed Switch Hardware Installation Guide

Troubleshooting Device Connections

Ensure the terminal or PC connection is configured to match the below settings.
If problems occur while connecting to the PC, ensure the emulation is set to VT-100. To set the emulation, select File >
Properties > Settings tab in the HyperTerminal window. The Emulation options are displayed in the HyperTerminal
Window:
Figure 3-7. Settings Tab in HyperTerminal Window
If the Emulation options are not displayed in the HyperTerminal window, reboot the device by disconnecting the power
supply.
27