Help
Press Help (on the keypad or remote) at any time to get interactive help for solving
common, picture, sound, and cabling problems.
NOTE: The projector can be re-programmed to display a custom (non-interactive)
screen when Help is pressed. To do this: Create your custom screen on a computer
and display it on the projector, then use the Take Snapshot command in the Setup
menu. When you see the Snapshot Successful message, hold down the Help button
until the message is removed.
To revert a customized Help screen back to the InFocus default Help screen, a Fac-
tory Reset will be needed.
33