Subscribe to Our Youtube Channel
Related Manuals for Dogtra YS 200
Summary of Contents for Dogtra YS 200
- Page 1 NO BARK COLLAR OWNER’S MANUAL Copyright c 2003 Dogtra Company 2005 - Web Site : www.dogtra.com...
- Page 2 INTRODUCTION Congratulations on your purchase of the “Yapper Stopper” Model YS200. This product has been specifically designed to prevent your dog from barking excessively. It automatically emits electrical stimulation in response to the dog’s barking. Instructions are included. Please read them thoroughly before using your “Yapper Stopper”.
- Page 3 Extra set of long contact points for dogs training dogs. with long or thick coats Operating instructions 3. Do not attempt to test Dogtra collars on humans or other animals. OPERATION 4. Dogs should be in good health during any e-collar training.
- Page 4 TO RECHARGE THE BATTERIES 4. If the AC adapter is left plugged into the battery unit over 4 days (96 hours), this may cause serious damage to the battery cell. For long term storage, it is necessary to charge the battery for at least fourteen hours once each month and to store it at room temperature.
- Page 5 Testing The Yapper Stopper SELECTING ON-OFF & INTENSITY LEVELS. The dial on the collar is used to turn the “Yapper Stopper” ON and OFF and for selecting the intensity level. To turn OFF the “Yapper Stopper”, position as shown above. 1) Turn on the “Yapper Stopper”...
-
Page 6: Fitting The Collar
FITTING THE COLLAR NOTICE : When first using the “Yapper Stopper”, it is Tighten the collar around the dog’s neck so that the recommended that you start with the lowest level. points are in contact with the dog’s skin. If the dog continues to bark, gradually increase the If the collar is too loose, the dog will not receive intensity level. -
Page 7: Safety Precautions
Yapper Stopper before putting it on Adjust collar fit your dog. Try using the longer contact points Call Dogtra Help! line To prevent skin irritation, the collar should not be Toll free 1-888-811-9111 worn more than eight hours at a time. - Page 8 Please include a note explaining the problem. Be sure to include your name, address and phone number. Repairs may be sent to the following address. A self-addressed stamped envelope should be sent to : Dogtra Company / Repairs 22912 Lockness Avenue Torrance, CA 90501 U.S.A.
Need help?
Do you have a question about the YS 200 and is the answer not in the manual?
Questions and answers