Auto Power On - SoftBank 708SC User Manual

When alarm time arrives
Alarm sounds and a message appears. If set to mute
( P.9-3), handset vibrates. Press any key once to stop Alarm
sound and once more to clear the message.
When Snooze is on
Alarm sounds for one minute, up to six times at the specified
interval, or until Snooze is canceled. If no handset operations
take place, and y, o (End) are not pressed while
alarm sounds, alarm is automatically reset to sound again at
the specified interval. To cancel Snooze, press y or o
(End).
When a call is being initiated or during a call
When 708SC is engaged (Connecting appears), a tone
14
sounds and an indicator appears; uncheck Alerts on call (in
Phone sounds setting) to cancel tone. When a call is being
Initiated (Dialing appears), a tone sounds and an indicator
appears. Press any key twice to clear indicator; if Snooze On,
press o (End).
While capturing video or recording sound
Alarm sounds when image capturing or recording ends.
14-4

Auto Power On

Default Setting Off
When this setting is active, 708SC automatically turns on
at Wake-up alarm or Alarm time.
APress c and select Tools
Auto power
BSelect On or Off and press c (Save)
Note
• Cancel Auto Power On near electronic devices
employing high precision or low frequency signals,
in places where mobile phone use is prohibited, like
airplanes or hospitals.
Alarms