Audio Dubbing (Only For Hr-S4800U) - JVC HR-S3800U Instructions Manual

Audio Dubbing
(ONLY FOR HR-S4800U)
Connection
POWER
S-VIDEO VIDEO (MONO)L—AUDIO—R
S-VHS ET
To AUDIO IN
To Audio output
CD player
(as the audio source)
c Audio Dubbing is also possible using the audio
input connectors on the rear panel.
You can replace sounds recorded on the normal track with
new sounds — for example, your favorite song played back
on the CD player.
c Refer also to the other audio component's instruction
manual for connection and its operations.
Normal track
Before audio
dubbing
Video and
Hi-Fi track
After audio
dubbing
1 Make connections
Connect an audio cable between the VCR's audio
input connectors and the audio component's
audio output connectors.
c If the audio component is monaural, connect
the AUDIO L (MONO) input connector on the
VCR.
HR-S4800U/S3800U-EN44-53
This VCR (for playback)
REW FF
MENU
PLAY
SP EP
CH
VCR REC STOP/EJECT PAUSE
OK
Audio cable
(not supplied)
47
2
Load a cassette and prepare the audio
source
3 Select input mode
Select "F-1" — when connecting the audio
component to the audio input connectors on
the front panel.
Select "L-1" — when connecting the audio
component to the audio input connectors on
the rear panel.
On the front panel:
Press CH5∞.
On the Remote:
Press the Number key "0 (AUX)" or CH +/–.
4
Set "EDIT FUNCTION" to "A. DUB"
Follow the procedure described on pages 38 and 42.
c Make sure to set "EDIT FUNCTION" to "REC-
PAUSE" after you finish editing tapes. This
cancels the editing function.
5 Locate start point
1 Press PLAY ( 3 ) to start playback.
2 Press PAUSE ( 8 ) when you find the beginning
of the scene for which you want to audio-dub.
6
Activate editing mode
Press REC ( ¶ ) on the front panel.
c The VCR enters the Audio Dubbing pause mode.
blinks, and
c
display panel.
7
Start audio dubbing
Press PLAY ( 3 ) on this VCR and start playing
the audio source.
blinks and
c
display panel.
To stop audio dubbing
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 )
on the front panel.
c Audio dubbing automatically stops when the counter
reading becomes "0:00:00", and the VCR starts normal
playback.
NOTES:
c During Audio Dubbing, the sound recorded on the normal
track is selected as the monitor sound. If you want to listen to
the Hi-Fi or mixed sound (Hi-Fi sound and monaural sound),
see "Selecting monitor sound — Audio Monitor" ( Z pg. 23).
c Audio Dubbing cannot be performed on a tape with its record
safety tab removed.
c When playing back an audio-dubbed tape, select the sound
you want. See "Selecting monitor sound — Audio Monitor"
( Z pg. 23).
c Picture may be distorted if you pause Audio Dubbing.
00.1.31, 10:03 AM
47
EN
light up on the front
is displayed on the front