Stereo And Sap (Second Audio Program) (Hr-J6006Um Only); To Record Sap Programs (Hr-J6006Um Only) - JVC HR-J6006UM Instructions Manual

MENU
NOTES:
● If a SAP program is received and "2ND AUDIO RECORD" is
set to "ON", the SAP audio is recorded on both the Normal
and Hi-Fi tracks. The main audio program is not recorded.
● If a non-SAP program is received, the main audio is recorded
on both the Hi-Fi and Normal audio tracks.
Downloaded from: https://www.usersmanualguide.com/
1 2 3
2
4 5 6
8 9
7
0
4
1
OK
Stereo And SAP
(Second Audio Program)
(HR-J6006UM Only)
Your VCR's built-in MTS decoder enables reception of Multi-
channel TV Sound broadcasts.
When the channel is changed...
● The "STEREO" indication appears on the screen for about 5
seconds if the program is a stereo broadcast.
● The "SAP" indication appears on the screen for about 5
seconds if the program is an SAP broadcast.
● Both indications appear when a stereo program is
accompanied by SAP audio.
To Record Stereo Programs . . .
. . . simply follow the basic recording procedure.
To Listen To Stereo Soundtrack During Recording . . .
. . . set "AUDIO MONITOR" to "HI-FI" at the Function screen
( pg. 19).
To Record SAP Programs...
(HR-J6006UM Only)
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS FUNCTION SET SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5∞ or % fi, then press OK or
SELECT 2ND AUDIO RECORD SET
MODE
3
Move the highlight bar
(arrow) to "2ND AUDIO
RECORD" by pressing
CH5∞ or % fi, then press
OK or to set to "ON".
RETURN TO NORMAL SCREEN
4
Press MENU.
23
EN
.
FUNCTION
ON
=B.E.S.T.
PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP = EP TIMER OFF
VIDEO STABILIZER ON
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
=2ND AUDIO RECORD ON
AUDIO MONITOR HI–FI
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END