Setting Dbs Receiver Output Channel & Brand - JVC HR-S3800U Instructions Manual

Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
POWER
S-VIDEO VIDEO (MONO)L—AUDIO—R
S-VHS ET
1
4
7
1
2
Setting DBS receiver output
channel & brand
After installation, set the DBS receiver's output channel
and its brand correctly; otherwise, the Controller cannot
work correctly.
1 Turn on DBS receiver
Select a channel other than channel 55, 100 or
205 on your DBS receiver.
HR-S4800U/S3800U-EN01-20
3 4
2
REW
MENU
PLAY
SP EP
CH
VCR REC STOP/EJECT PAUSE
OK
3 – 5
2 3
2
5 6
8 9
0
4
3 4
3 – 5
19
2
Access Main Menu screen on VCR
Press MENU.
3
Access Initial Set screen
On the front panel:
Press CH5∞ to move the highlight bar (arrow) to
"INITIAL SET", then press OK.
On the Remote:
Press SHUTTLE PLUS %fi to move the highlight
FF
bar (arrow) to "INITIAL SET", then press OK or
SHUTTLE PLUS #.
4
Access DBS Receiver Set screen
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to "DBS RECEIVER
SET", then press OK.
On the Remote:
Press SHUTTLE PLUS
%fi to move the highlight bar (arrow) to "DBS
RECEIVER SET", then press OK or SHUTTLE
PLUS #.
5
Select DBS receiver output channel
Your selection depends
on how your DBS
receiver is connected to
your VCR.
c If your DBS receiver
is connected to your
VCR's ANTENNA IN
terminal on the rear
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until the channel
number representing the DBS receiver's output
(CH3 or CH4) appears on the screen.
c If your DBS receiver is connected to your VCR's
AUDIO/VIDEO IN connectors on the front panel
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until "ON F-1
(FRONT)" appears on the screen.
c If your DBS receiver is connected to your VCR's
AUDIO/VIDEO IN connectors on the rear panel
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until "ON L-1
(REAR)" appears on the screen.
c If you do not use a DBS receiver
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until "OFF" appears
on the screen.
00.1.31, 9:55 AM
19
EN
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
CABLE BOX SET
= DBS RECEIVER SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
DBS RECEIVER SET
OFF
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
CONTINUED ON NEXT PAGE \