Table of Contents
Advertisement
4. Software Installation
4.1.
Administration Utilities Installation
The Administrator Installation Program executes a wizard-driven procedure
that performs the following tasks:
Install all necessary utilities and drivers in your PC (including the
client utilities).
Prompt to configure the print server (including the print server name
and IP Address).
Add the network port of the print server to your PC.
After the installation, perform the standard "Add Printer" procedure and
choose the print server's "Network Port" in the "Available Ports" list. Then, you
can test printing function from the Administrator PC.
The Administrator Installation can be performed on Windows
98SE/Me/NT/2000/XP/2003/Vista with the same user interface. Before the
installation, please verify that your network protocol is installed on your PC
(TCP/IP, IPX and/or NetBEUI). Note that the following steps are running in
Windows XP, for other Operation Systems the procedures are similar.
1. Insert the CD shipped along with the print server into your CD-ROM
drive. The Autorun.exe program should be executed automatically. If not,
run Autorun.exe manually from CD-ROM drive's root directory.
4
Advertisement
Table of Contents
