6.11
Replacing operating console
CAUTION! Burn and scald hazard if power cable is short-circuited!
• Interrupt the power supply by removing the battery plugs before you start work on the
electronic system.
NOTE:
The plugs on the operating console cannot be wrongly connected because all plugs have a
different size and only fit in one socket.
Requirements:
•
Phillips screwdriver
•
Remove the seat.
•
Remove motor cover.
•
Disconnect battery cable (1).
•
Remove screws (1) below operating
console.
•
Remove operating console and fold
upwards.
•
Remove screws (3) on drive lever (2) and
remove drive lever.
•
Disconnect plug from operating console
circuit board.
•
Replace operating console.
•
Reconnect plug with circuit board on new
operating console.
39