•
4-wheel version:
•
Slacken both brake cables.
•
Disconnect brake cable at affected wheel.
•
Loosen wheel bolt.
•
Pull wheel and brake off shaft.
•
Pull brake out of brake drum.
•
Replace brake lining or complete brake.
•
Reassemble wheel and brake.
•
Push wheel and brake onto shaft, or push
axle through.
•
Apply brake so that brake shoes can align.
•
Reassembly of the brake takes place in
reverse order
•
Adjust braking force on wheel using brake
lever setting screw.
•
Check braking function while pushing.
33