Page 1
1 - I N C L U D E S I T E M S 3 - 1 6 Instruction Sheet Jacobsen® Vertical Mower Model No. 67138 WARNING If incorrectly used, this machine can cause severe injury. Those who use and maintain this machine should be trained in its proper use, warned of its dangers and should read the entire manual before attempting to set up, operate, adjust, or service the machine.
Page 2
a. Wait for all movement to stop before making any This kit is intended only for use with Eclipse 322 , G-Plex ™ ™ adjustments or modifications. and E-Plex riding greens mowers. ™ b. Allow sufficient time for the unit to cool down. CAUTION c.
Page 3
Cutting Depth Figure 3 NOTICE When verticutting with the Eclipse 322 Jacobsen recommends setting the reel speed at 1800 rpm. If the reel motor temperature or current exceeds limits, reduce ground speed of mower, reduce reel speed, or adjust verticutter depth.
Page 4
Adding, removing and Replacing blades ___________________________________________ d. Slide spacer (D) towards new blade to engage 1. Blade spacing can be adjusted for different modes of operation from 1/2 in. (13 mm) to 1-1/4 in. (32 mm) in 1/4 locking lugs, torque nut (C) to 12-15 fl.lb. (16-20 in.
Page 5
Lubrication ___________________________________________________________________ Use lubricant sparingly. Excess lubricant may drop from the unit and cause turf damage. Lube Lube (both ends) Lube Figure 5...
VERTICAL MOWER Front Roller Part Number 1004991 Item Part No. Qty. Description Serial Numbers/Notes > Tube, Roller > 3010621 Shaft > 471214 Fitting, Grease > 3010712 Bearing > 3010286 Seal > Change from previous revision...
VERTICAL MOWER Rear Roller Part Number 1004990 Item Part No. Qty. Description Serial Numbers/Notes > Roller Tube > 3010422 Shaft > 3010712 Bearing > 3010286 Seal > Change from previous revision...
Page 12
MOTOR ADAPTER KIT Greensplex Greensmower Reel Motor Adapter Kit Part No. 894991 Note: This cutting head requires the Motor Adapter Kit 894991. Check to make sure your Greensplex Greensmower has this Motor Adapter Kit before installing the cutting head. If your Greensplex Greensmower does not have this Motor Adapter, you need to order a Motor Adapter kit Part No.
Page 13
MOTOR ADAPTER KIT E-Plex Electric Greensmower Motor Adapter Kit Part Number 894996 Note: This cutting head requires the Motor Adapter Kit 894996. Check to make sure your E-Plex Electric Greensmower has this Motor Adapter Kit before installing the cutting head. If your E-Plex Electric Greensmower does not have this Motor Adapter, you need to order a Motor Adapter kit Part No.
Page 14
Health & Safety Management Cert No. FS609275 Cert No. EMS609276 Cert No. OHS609277 United Kingdom Ransomes Jacobsen Limited West Road, Ransomes Europark, Ipswich, IP3 9TT English Company Registration No. 1070731 T: +44 1473 270000 W: www.ransomes.com Europe office Ransomes Jacobsen France...
Need help?
Do you have a question about the 67138 and is the answer not in the manual?
Questions and answers