Table of Contents
Advertisement
Sound problems
• Check the antenna/cable connections
(II-~
Chapter
21.
• The station may have broadcast difficulties. Try
another channel.
• The sound may be muted. Press
VOLUME.
• [f you hear no sound. try setting the
MTS
feature
to
Stereo
mode
(1("
page 38).
• If you are not receiving a second audio program
from a known SAP source. make sure the
MTS
feature is set to
SAP
mode
(u~v
page 38).
•
[I'
you hear audio that seems "incorrect" for the
program you are watching (such as music or a
foreign language). the SAP mode may he on. Set
the
MTS
feature to
Stereo
mode
(IQ<"
page 38).
Remote control problems
• Remove all obstructions between the remote
control and the TV.
• The remote control batteries may be dead.
Replace the batteries
(D@\'
page 20).
• [f the TV still does not act as expected, use the
Reset Factory Defaults procedure
(u~"
page 27).
Channel tuning problems
• The channel may have been erased from the
channel memory by the
Programming channels
automatically
feature. Add the channel to the
channel memory
(1Rl'
page 24).
• The channel may be blocked by the
LOCK
feature. Unblock the channel
(I@"
page 41 ).
• If you are unable to tune digital channels. check
the antenna configuration
(I@"
page 24). If you
are sti II unable to tune digital channels. clear all
channels from the channel list and reprogram
channels into the channel memory
(Il@r
pagc 24).
If you are still unable to tune digital channels,
use the Reset Factory Defaults procedure
(I@'
page 28). Also see 'TV stops responding to
controls" and "Other problems"
(Dz'
page 53).
I
54
Closed caption problems
• If the program or video you selected is nut closed-
captioned. no captions will display
(1rS\
page 36).
• If text is not available, a black rectangle may
appear. If this happens, turn off the closed caption
feature
(®'
page 36).
• A closed-caption signal may not display correctly
in the following situations: a) when a videotape
has been dubbed; b) when the signal reception
is weak; or c) when the signal reception is
nonstandard
(l:<i'
page 36).
Rating blocking (V-Chip) problems
• If you forget your PIN code: While the PIN
code entering screen is displayed. press
I
RECAll
I
four times within 5 seconds. The PIN code you
previously stored will be cleared
(ll~'
page 39).
No REGZA-L1NK operation
• The REGZA-L1NK feature is available for
Toshiba REGZA-L1NK compatible devices.
• Make sure the HOMI cables with the HDMI Logo
(Hi:lmn
are used.
• When the connected REGZA-L1NK device does
not work correctly after you have changed settings
of the device, turn off your TV and unplug the
power cord, then plug and turn on again.
• If several devices arc connected, REGZA-LINK
feature may not operate properly.
• Read the instruction manual furnished with the
connected REGZA-LINK device.
HDMI problems
For HOMI cables
• Make sure to use cables with the HOMI Logo
(Hi:lmn
(1&
page 13).
Media Player problems
• Make sure that devices are connected correctly.
• IncclITect behavior may occur with a USB HUB
connection.
• Photo tiles that was processed and edited by using
the PC's application software may not be able to be
viewed.
• The TV may select one format automatically and
play it when contents that support two or more
formats are played.
• Confirm content" of the USB storage device are
formats that correspond with this TV
(®'
page 44).
Advertisement
Table of Contents
