Connecting a DVD player with ColorStream® (component video), a VCR,
or a satellite receiver
From satellite dish
Component
TV upper back panel
You will
ne{~d:
•
Coaxial cables
•
Standard A/V cables
- If you have
a
mono VCR, connect UMONO
on the TV to your VCR's audio out terminal
using the white audio cable only
•
Standard audio cables
•
Component video cables
-
You can connect the component video cables
(plus audio cables) from the OVO player or
satellite receiver to the ColorStream terminal
on the TV The ColorStream HD terminal
can be used with Progressive (4BOp, 720p)
and Interlaced (4BOi, 10BOO scan systems.
A 10BOi signal will provide the best picture
performance (10BOp is not supported).
Note: When you use ColorStream HO or Video,
switch AV input mode appropriately (c:.<Y·"Setting AV
Input mode" on page 26).
To view antenna or Cable channels:
Select the
ANTICABLE
video input source on the TV,'"
To view the DVD player:
Turn 0
the DVD player. Select the
ColorStream HD
video input source on the TV. '"
TV back panel
Coaxial cable
To view satellite programs using the
component video connections:
Turn on the satellite receiver. Select the
ColorStream
HD
video input source on the TV. '"
To view the VCR or view and record
antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want
to watch. Select the
VIDEO
video input source on the TV."'
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to
record.
." To select the video input source, press INPUT on the
remote control
(~?!'
page 21)
The unauthorized recording, use, distribution, or
revision of television programs, videotapes, DVDs,
and other materials is prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
15
I