Toshiba 19SL400U Owner's Manual page 18

Chapter
2:
Connecting your
TV
Connecting a digital audio system
The TV's
DIGITAL AUDIO OUT
terminal outputs a
*Dolby"" Digital or 2-channel down-mixed
reM
(pulse-code modulation) signal for usc with an
external Dolby"" Digital decoder or other external
audio system with optical audio input.
You
will
need:
• Optical audio cable (Use an optical audio cable
that has the larger "TosLink" connector and not
the smaller "mini-optical" connector.)
Note:
• Some audio systems may not be compatible
with Dolby Digital bitstream signals. Older
audio systems that are not compatible with
standard optical out signals may not work
properly, creating
a
high noise level that
may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR
WARRANTY
• The DIGITAL AUDIO OUT terminal may not
output some digital audio sources because
of copy restrictions
o
o
Dolby Digital decoder or
r--_,
other digital audio system
Optical
audiO
cable
Manufactured under license from Dolby
Laboratories. Dolby. and the double-D symbol are
trademarks of Dolby Laboratories
Connecting a personal computer (PC)
With either the PC IN or HDMI connection. you can watch
your computer's display on the TV and hear the sound
from the TV's speakers.
To connect a PC to the PC IN terminal on the TV:
When connecting a PC to the PC IN terminal on the TV. use
an analog RGB ( IS-pin) computer cable and a PC audio cable.
To control the audio:
3
Highlight
Audio Setup
and press
(E~.
Conversion adapter (if
necessary)
• To use a Pc. set the monitor output resolution on the
PC before connecting it to the TV. The PC IN terminal
can accept and display VGA. SVGA. XGA and WXGA
signal formats. For detailed signal specifications
(Ui
1
page 56).
Other formats or non-standard signals will not he
displayed correctly.
• To display thc optimulll picture. use the PC setting
feature
(1r51
"Using the PC settings featurc" on page 43).
( coll/illl/cd)
P · ..
MENU
I T\"
less 0 on t 1e . s remote control and open the
Sound
mcnu.
4
[n the
Optical Output Format
field. select either
Dolby Digital
or
PCM,
depending on your device
(us"Selecting the optical audio output format" on
page 3X).
1
Turn on the TV and the digital audio dc\icc.
2
I 18