Chapter 2: Connecting Your Tv; Overview Of Cable Types - Toshiba 19SL400U Owner's Manual

Overview of cable types
Cables can be purchased from most stores that sell audio/
video devices. Before purchasing any cables, be sure of
connector types required by your devices and the length
of each cable.
Coaxial (F-type) cable
G
{1ll-------
Coaxial (F-type) cable is used for connecting your
antenna, cable TV service, and/or cable converter box
to the
ANTICABLE
input on your TV.
Standard
AN
cables (red/white/yellow)
~~
~
._-----
~
Standard
AN
cables (composite video) usually come
in sets of three, and are for use with video devices with
analog audio and composite video output. These cables
(and the related inputs on your TV) are typically color-
coded according to use: yellow for video, red for stereo
right audio, and white for stereo left (or mono) audio.
Component video cables (red/green/blue)
~E7
~
, - - - - -
~
Component video cables come in sets of three and are
for use with video devices with component video output.
(ColorStream'EI is Toshiba's brand of component video.)
These cables are typically color-coded red, green, and
blue. Separate audio cables are required for a complete
connection.
Note: Component video cables provide better
picture performance than
a
standard (composite)
video.
HOMI® cable
(with HOMI Logo "HOm.·")
O ~
HDMI (High-Definition Multimedia Interface) cable
is for use with devices with an HDMI output. An
HDMI cable delivers digital audio and video in its
native format. This cable carries both video and audio
information; therefore, separate audio cables are not
required for a complete HDMI device connection
(~
page 16 and page 19).
Note: An HOMI cable provides the best audio and
picture performance.
Optical audio cable
[Q]
~I----
Optical audio cable is for connecting receivers with
Dolby Digital or PCM (pulse-code modulation) optical
audio input to the TV's
DIGITAL AUDIO OUT
terminal
(~page
18).
Analog RGB (15-pin) computer cable
~W==
Analog RGB (IS-pin) computer cable is for connecting
a PC to the TV's
PC IN
terminal
(~page
18).
Note: Separate audio cables are required for
a
complete connection.
3.5mm Stereo to RCA Y-cable
I
:>
11I1• •
,11
'0
3.Smm Stereo to RCA Y-Cable is for connecting audio
signal from DVI device to TV.
About the connection illustrations
You can connect different types and brands of devices to
your TV in several different configurations. The connection
illustrations in this manual are representative of typical
device connections only. The input/output terminals on
your devices may differ from those illustrated herein. For
details on connecting and using your specific devices, refer
to each device's owner's manual.
13 I