Grounding Instructions - Clarke 01281A Operator's Manual

ENGLISH
EN
120 VOLT MACHINES
Instructions for connection to the power
supply and the electrical ground.
This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electrical shock. This
product is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be inserted into
an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING: Improper connection of the
equipment-grounding conductor can result in
a risk of electric shock. Check with a qualifi ed
electrician or service person if you are in doubt
as to whether the outlet is properly grounded. Do
not modify the plug provided with the product - if
it will not fi t the outlet, have a proper outlet in-
stalled by a qualifi ed electrician.
This product is for use on a nominal 120 volt circuit and has
a grounding attachment plug that looks like the plug illustrated
in Fig. 4. Make sure that the product is connected to an outlet
having the same confi guration as the plug. No adaptor should
be used with this product.
WARNING: To prevent possible electric
shock, protect the machine from rain. Keep the
machine in a dry building.
WARNING: To prevent possible electrical
shock, always use a 3-wire electrical system con-
nected to the electrical ground. For maximum
protection against electrical shock, use a circuit
that is protected by a ground fault circuit inter-
rupter. Consult your electrical contractor.
WARNING: Do not cut, remove or break the
ground pin. If the outlet does not fi t the plug,
consult your electrical contractor.
WARNING: Have worn, cut or damaged
cords replaced by an authorized service person.
EXTENSION CORDS
Use only an approved extension cord with three conductors, a
plug with three terminals, and a connector body with three holes.
The machine has a power cord with wire size 14 AWG (AWG
means American Wire Gauge).
WARNING: If you use an extension cord, use
an extension cord with minimum wire size 12 AWG.
Do not use an extension cord longer than 50 feet.
Do not join two extension cords.
- 8 - FORM NO. 70880A
Grounded
Outlet
Grounding
Pin
(United States, Mexico and Canada)
Figure 3
Clarke
®
Operator's Manual (EN) - CFP Polisher
Grounded
Outlet
Box