Timer Recording; Express Timer Programing; To Use The Vcr While It Is In Timer Recording Standby Mode - JVC HR-J7020UM Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-J7020UM:
Table of Contents

Advertisement

Timer Recording

Up to 8 timer recording programs can be made using Express
timer programing method as far as a year in advance. Remember,
the clock must be set before you can program the timer.
NOTES:
If all the 8 programs have already been set, "PROGRAM FULL"
appears on the TV screen.
After timer recording is completed, the VCR turns off
automatically.
You can program the timer recording while a regular recording
is in progress; the menu screens will not be recorded.
If the tape reaches its end during timer recording, the recording
stops and "
", "
" and " $" on the display panel blink. Press
#
TIMER to disengage timer, then press STOP/EJECT (0) on
the VCR to eject the cassette or press POWER 1 then press
REW (3) to rewind the tape.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).

Express Timer Programing

Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
TIMER
— 11 —
A
Press PROG. on the Remote to access the Program screen.
B
Press START
/
(Number keys "1"
and/or "4"), STOP
/
(Number
keys "2" and/or "5"), DATE
(Number keys "3" and/or "6"), or
CH
/
repeatedly to enter the start
time, stop time, date or channel.
Press and hold START
STOP
/
to increase the time in
30-minute intervals.
To set the tape speed, press SP/EP.
To timer-record daily (Monday–Friday) or weekly serials,
press DAILY (M-F) (Number key "8") or WEEKLY (Number
key "9"). Pressing the button again makes the "DAILY" or
"WEEKLY" display disappear.
C
Press OK or PROG.
If "PROGRAM NOT COMPLETED PROGRAM OVERLAP"
appears, see "Program overlap warning display" (
D
Press TIMER. The VCR turns off automatically and "
displayed on the display panel.
To use the VCR while it is in timer
recording standby mode
Press TIMER, then press POWER 1. After you use the VCR, press
TIMER again to put the VCR into timer recording standby mode.
PROGRAM 1
START
STOP
/
– –:– –AM
– –:– –AM
DATE
CH
– –/– –/– –
– – – SP
PRESS (+/–, SP/EP, 8=DAILY
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
/
or
pg. 12).
" is
#

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-j7020ua

Table of Contents