Checking, Canceling Or Changing Program Settings; Program Overlap Warning Display - JVC HR-J7020UM Instructions Manual

– Timer Recording –
Checking, canceling or changing
program settings
A
Disengage timer
Press TIMER, then press POWER 1.
When "AUTO TIMER" (
have to press TIMER.
B
Access Program Check screen
Press PROG. CHECK.
C
Access Program screen
Press PROG. CHECK again. Each time you
press PROG. CHECK, the next program's
Program screen appears.
D
Cancel or change program setting
To cancel a program, press CANCEL when the Program screen
you do not want is shown.
To change a program, press the appropriate button: START
(Number keys "1" and/or "4"), STOP
and/or "5"), DATE / (Number keys "3" and/or "6"), CH
, DAILY (M-F) (Number key "8"), WEEKLY (Number key "9")
and/or SP/EP when the Program screen on which you want to
make changes is shown.
E
Return to normal screen
Press PROG. CHECK repeatedly until no Program screen is
shown.
F
Reengage timer recording standby mode
Press TIMER. The VCR turns off automatically and "
displayed on the display panel.
When "AUTO TIMER" (
recording standby mode automatically resumes when you turn
off the VCR.
pg. 13) is set to "ON", you do not
PR START STOP CH
1 8:00P 10:00 12
2 10:00A 10:45 40
3 11:30P 1:00 125
4
5
6
7
8
PRESS (CHECK) TO NEXT
PROGRAM 1
START STOP
8:00 PM 10:00 PM
DATE CH
12/24/04 12 SP
PRESS (CANCEL) TO CANCEL
PRESS (CHECK) TO NEXT
/ (Number keys "2"
" is
#
pg. 13) is set to "ON", the timer

Program overlap warning display

If "PROGRAM NOT COMPLETED PROGRAM OVERLAP"
appears, you have another program overlapping the program you
have just made. The Program Check screen appears and
conflicting programs will start blinking.
PROGRAM NOT COMPLETED
PROGRAM OVERLAP
DATE
12/24
12/25
12/25
Example:
Program 1 (you have just made) and Program 4 overlap each
other
A
Select program to modify
Press , then press
rt
You can only select one of the
overlapping programs.
If you do not mind this overlap, press
PROG. to finish the timer program
setting. The program starting earlier or
program with the lower program number will be recorded.
B
Cancel or change program setting
/
To cancel a program, press CANCEL when
the Program screen you do not want is
/
shown.
To change a program, press the
appropriate button: START
keys "1" and/or "4"), STOP
(Number keys "2" and/or "5"), DATE
and/or "6"), CH
which you want to make changes is shown, then press OK.
If the overlap is not yet solved, the conflicting programs will be
shown on the Program check screen. Repeat the above steps
again.
— 12 —
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4 9:00P 10:00 10 12/24
5
6
7
8
( ) THEN ( ) (PROG.) : END
PR START
1 8:00P
.
e
2 10:00A
3 11:30P
4 9:00P
5
6
7
8
( ) THEN ( ) (PROG.) : END
START
9:00PM
DATE
12/24/04
FRI
PRESS (CANCEL) TO CANCEL
PRESS (OK) TO CONFIRM
/ (Number
PRESS (PROG.) TO END
/
/ (Number keys "3"
/ , and/or SP/EP when the Program screen on
STOP CH DATE
10:00 12 12/24
10:45 40 12/25
1:00 125 12/25
10:00 10 12/24
PROGRAM 4
STOP
10:00PM
CH
10 SP