Changing Engine Oil; Changing Oil Filter - TATA Motors Sumo Victa Di Turbo Owner's Manual

Table of Contents

Advertisement

Changing engine oil

Changing engine oil
Changing engine oil
Changing engine oil
Changing engine oil
Change engine oil in the crankcase at recommended interval.
Engine oil should be drained while it is hot. Unscrew engine
sump drain plug and allow oil to drain out fully.

Changing oil filter

Changing oil filter
Changing oil filter
Changing oil filter
Changing oil filter
Unscrew and remove engine oil filter with the help of special
tool, if necessary. Engine oil filter is a spin-on type and cannot
be re-used. Change engine oil filter with every oil change.
Always use genuine engine oil filter for replacement
Always use genuine engine oil filter for replacement
Always use genuine engine oil filter for replacement
Always use genuine engine oil filter for replacement
Always use genuine engine oil filter for replacement
Destroy the oil filter to avoid resale of the same by unscrupulous
people. Fill the new oil filter with fresh engine oil. Smear a little
engine oil on rubber gasket of new engine oil filter. Hand tighten
the filter fully and tighten it a further half turn with a special
tool. Do not overtighten engine oil filter as this may damage oil
filter and oil may leak out.
Before filling in fresh oil in the engine, refill the sump drain plug
using a new sealing washer. Tighten drain plug to 4 mkg torque.
Fill in specified quantity of fresh engine oil in the engine
crankcase. Start engine and run for a few minutes. Stop
the engine and re-check oil level after approx. 20 minutes.
Top up if oil level is less than midway between upper and lower
marks on the dipstick.
CHANGING ENGINE OIL & OIL FIL
CHANGING ENGINE OIL & OIL FIL
CHANGING ENGINE OIL & OIL FIL
CHANGING ENGINE OIL & OIL FILTER
CHANGING ENGINE OIL & OIL FIL
1 1 1 1 1
1. Engine Oil Filler Cap
2. Dip Stick
Engine Oil Filter
73
TER
TER
TER
TER
2 2 2 2 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents