5.15
Power Switch Cable Components
5.15.1
Switch Cable Assembly
The switch cable assembly consist of two parts: the switch mounting bracket assembly and the
switch cable.
1. Prepare the computer for disassembly (Section 5.4).
2. Remove the system unit cover (Section 5.7).
3. Rotate the drive cage to an upright position.
4. Disconnect the switch cable assembly from the system board 1.
5. Disconnect the cable from the solenoid 2.
6. Remove the switch mounting bracket assembly from the chassis by squeezing the tab on top of
the bracket 3, then lifting the bracket up and out of the chassis 4.
Disconnecting the Switch Cable
5-26
Removal & Replacement Procedures