Cable Lock Installation - Compaq Deskpro EN Series Maintenance & Service Manual

5.6

Cable Lock Installation

1. Separate the pieces of the security bracket 1 by bending the metal where the three pieces join.
2. Insert the tang of the narrow bracket 2 into the slot, and slide the U-shaped bracket 3 between
the narrow bracket and the system unit cover.
3. Secure the bracket with the self-tapping screw 4 included in the cable lock kit.
4. Cover the screw with the flat portion of the bracket 5.
5. Install a lock 6 (not provided) to secure the top part of the security bracket to inhibit access to
the inside of the computer. Install a cable lock (not provided) to secure the computer to a fixed
object.
Installing the Cable Lock
To remove the cable lock provision, reverse the removal procedure.
Compaq Deskpro EN Series, Small Form Factor and Net PC Models 5-13