One Touch Memory - AEG Voxtel C115 Quick Start Manual

9.3 To answer a call
When the phone rings, lift the handset or press the speakerphone button
>The display shows the duration of the call in minutes and seconds.
9.4 To adjust the speakerphone volume
During a call, adjust the volume of the speakerphone to your comfortable volume level using the
volume buttons
>The display shows the volume level from 1 to 6 in the lower left corner of the LCD screen.
9.5 To end a call
>Replace the handset on the base unit cradle or press the speakerphone button
9.6 To switch between the handset and the speakerphone
During a phone conversation through the handset press the speakerphone button
hands-free.
>The Speakerphone icon on the display and the speakerphone light will turn on, but conversation
remains through the handset until the handset is replaced on the base unit. While in speakerphone
mode, lift the handset to enable a private conversation.
9.7 Mute the microphone
During a call, you can mute the microphone or handset microphone so that the person on the other
end cannot hear you.
Press the mute button
>While the microphone is muted, "MUTE" will flash on the display and the mute icon
flash.
Press the mute button
10

ONE TOUCH MEMORY

10.1 Store (M1, M2, M3) memory
In standby mode, key in the telephone number you wish to store, up to a maximum of 24 digits.
Press the menu button
>The display shows "ENTER LOCATION".
Press the M1, M2, or M3 button to store the number in the selected memory.
10.2 Dial out stored number memory
Press the M1, M2, or M3 button.
>The programmed memory number will be displayed.
Lift the handset or press the speakerphone button
>The phone automatically redials the number using handset or speakerphone mode selected.
located on the top of the base unit.
.
again to get back to the call.
.
.
9
on the base unit.
on the base unit.
to speak
will also