AEG Voxtel C115 Quick Start Manual page 13

Press the stop button
Press and hold the OGM button
>The display shows "OGM RECORDING" and the message counter starts to count.
Start recording your OGM1. Speak directly into the base unit's microphone from a distance of about
15 cm).
When you finish speaking, press the stop button
>The display shows "PLAY OGM" and your recorded message will be played back.
14.3 To record OGM 2
After setting the OGM2, briefly press the stop button
Press and hold the OGM button
>The display shows "OGM RECORDING" and the message counter starts to count.
Start recording your OGM2. Speak directly into the base unit's microphone from a distance of about
15 cm.
When you finish speaking, press the stop button
>The display shows "PLAY OGM" and your recorded message will be played back.
14.4 To switch between OGMs
Press and release the stop button
>The machine does not record messages with OGM2 (announcement 2) selected; make sure
OGM1 is selected if you want callers to leave messages.
14.5 To turn the answering machine on / off
Press and hold the on/off button
>You will hear, "Answering machine on. Announcement one."
>The display shows "ANSWER A1" alternately with the calls information and the message light will
turn on.
Press and hold the on/off button
>You will hear, "Answering machine off."
>The display shows "ANSWER OFF" alternately with the calls information and the message light
will turn off.
Note:
Once turned off, you can still call the machine and it will answer after 15 rings, so you can enter
remote access mode, if required.
14.6 To playback your message/s
If you have messages or memos, the display shows the total number of messages "XX MESSAGES". If
you have new messages or memos, the display shows "XX NEW" and it will be shown alternately with
the total messages and the message light flashes.
14.7 Playback and pause
Press the play/pause button
>The machine will play all new messages/memos.
>While a message is being played, the display shows the caller display information (if subscribed),
"PLAY MESSAGE" for received messages or "PLAY MEMO" for recorded memos.
>If there are no messages/memos present, you will hear "You have no messages".
To pause a message playback, press the play/pause button
briefly until you hear "Announcement 1".
until you hear a beep.
until you hear a beep.
to switch between OGM1 and OGM2.
to turn on the answering system.
again to turn off the answering system.
.
to stop recording.
again. You will hear "Announcement 2."
to stop recording.
again.
13