Contact Information For more information about the V.3600 modem or other Telenetics communication solutions, please contact us using any of the following methods. Voice Calls To reach us, please call (949) 455-4000. Voice calls are answered from 8:00 am to 5:00 pm Pacific Time, Monday through Friday. Voice mail is available during non-business hours.
Chapter 1 Introduction This Quick-Start Guide describes how to get your Telenetics V.3600 Series Modem up and running in the shortest possible time. For detailed information about your V.3600 Series Modem, please consult the Telenetics V.3600 Modem User’s Guide (TEL-T0097) or the CD- ROM supplied with your V.3600 Series Modem.
Getting Started Features Data Mode ! Full-duplex operation on 2-wire public connections, or 2-wire or 4-wire private telephone connections with 2-wire public automatic or manual backup ! 300, 1200, 2400, 4800, 7200, 9600, 12000, 14400, 16800, 19200, 21600, 24000, 26400, 28800, 31200, 33600 bps synchronous or asynchronous DCE data rates Fax Mode ! Fax speeds to 14,400 bps...
Chapter 2 Installation This chapter describes how to install the V.3600 modem. Connecting a DTE The back panel of the V.3600 modem has a 25-pin D-series DTE connector that conforms to EIA-232 specifications. You must use a shielded DTE cable to comply with EMC requirements. Connecting to the Telephone Line The V.3600 modem operates in either dial-up or leased-line mode.
Page 6
Installation DT E C onnector 8-pin Screw s C onnectors TE LS ET DIAL LEA SED LINE C able supplied EIA-232 with telephone 25-Pin Connec tor to DT E Shielded D T E Cab le R J11C jac k installed by telephone com pan y Us e 8-pin M odular (at m odem end) to 6-pin Modular (at RJ 11 w all jac k end) connector.
Connecting to a Power Source Dial Line Jack T elset Leased (M ay be used for Line Jack Dial Bac kup) TE LS ET D IAL L EA SED L IN E EIA-232 25-Pin C onnector to D TE Leased Line C able Leased Line Jack...
Page 8
Installation DC Power Connection To protect the DC-to-DC converter from damage, ensure the positive and negative leads are properly connected. If the modem is equipped for 10-53 VDC power input, connect the power to the terminal block attached to the modem back panel. A chassis ground connection is also supplied on the terminal block.
! Software program a wide variety of software programs is available, or advanced computer users can write their own software programs to interact with the modem. The Telenetics V.3600 Modem User’s Guide describes the first five ways to change and select options. For information about using a Page 7...
Getting Started software program to change or select options, refer to the manual that came with the software. Powering-Up the Modem A power-up procedure is not required. Turn on the modem using the ON/OFF power switch on the rear panel. The modem is factory configured to operate in most public switched telephone applications.
The modem dials the number using either the pulse or tone dialing method, whichever is in effect, and takes the role of the originating modem. For additional dialing commands, refer to the Telenetics V.3600 Modem User’s Guide. Answering a Call There are three ways to answer a call.
Getting Started Answering Calls Manually When the modem detects an incoming ring, the modem LCD displays the ringing status. Press TALK/DATA to answer the call and place the modem in the data mode. Answering from a Terminal Using AT Commands When the modem detects an incoming ring, the modem displays the ring response.
Chapter 4 Using the Front Panel The V.3600 modem has a liquid-crystal display (LCD) front panel that provides easy real-time access to modem configuration and status. You can use the LCD at any time to modify modem options or to get information about modem operation and status.
Press This Push-button… Scroll vertically through the menus to select the appropriate menu category. Scroll horizontally through the submenus. Redisplay the previous menu. TALK/DATA For a complete list of the menu options, refer to the Telenetics V.3600 Modem User’s Guide. Page 12...
Need help?
Do you have a question about the V.3600 Series and is the answer not in the manual?
Questions and answers