Auto Set Up - JVC HR-J655EA Instructions Manual

6
EN

Auto Set Up

IMPORTANT
Don't press any buttons on the recorder or remote that
are not directly related to the step you are performing
while Auto Set Up is in progress.
If you perform Auto Set Up successfully during installa-
tion, there's no need to separately perform the Clock Set
or Channel Set procedures, but if adjustments become
necessary they can be performed as follows:
– To reset or adjust the time
– To add/delete channels manually
– To reset the tuner after moving to a different location
pg. 35
1
4
7
1
MENU
pg. 8
pg. 36
2 3
2
5 6
8 9
0
4
OK
PUSH JOG
INITIAL SETTINGS (cont.)
The Auto Set Up function simplifies installation by guiding you
through the procedures of setting the clock and tuner channels
— simply follow the on-screen menus that appear.
Before starting, make sure of the following:
The TV aerial cable should be connected to the recorder.
The recorder's mains power cord should be connected to
a mains outlet. pg. 3
The "Video Channel Set" procedure should be done first
and the TV should be set to its AV mode (with AV
connection pg. 5) or video channel (with RF
connection pg. 4).
SET TIME
1
Press PUSH JOG %fi to
set the time, then press OK
or PUSH JOG .
Press and hold either
button to delay or
advance the time by 30
minutes.
SET DATE
2
Press PUSH JOG %fi to set the date, then press OK or
PUSH JOG .
Press and hold either button to change the date by 15
days.
SET YEAR
3
Press PUSH JOG %fi to set the year, then press MENU.
CLOCK SET
TIME DATE YEAR
0:00 01.01 98
[ 5 /∞] =
[MENU] : EXIT