Table of Contents
Advertisement
Receiving Stereo And
Bilingual Programmes
Your recorder is equipped with a Sound-Multiplex decoder (A2)
making reception of stereo and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
Type of Broadcast
Being Received
A2 Stereo
A2 Bilingual
To listen to a stereo programme, press AUDIO until " " and
" " appear on the front display panel or "HIFI L
appears on the screen.
To listen to a bilingual programme, press AUDIO until " " or
" " appears on the front display panel, or "HIFI L
"HIFI
R" appears on the screen (as required).
NOTE:
"O.S.D." must be set to "ON" or the on-screen displays will not
appear (
pg. 9).
To Record Stereo And
Bilingual Programmes (A2)
Stereo programmes are automatically recorded in stereo on
the Hi-Fi audio track (with the normal audio track recording
mixed L and R channel sound).
Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack will be recorded
on the normal audio track.
NOTES:
If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
Before playing back a programme recorded in stereo, or a
bilingual programme, refer to "Soundtrack Selection" (
On-screen Display
ST
BIL
R"
" or
pg. 14).
Simulcast Recording
If FM simulcast TV programmes are available, you can record the
TV programme with the soundtrack from an FM-broadcast. In the
simulcast mode, the external audio programme is recorded on the
audio track (both Hi-Fi and normal).
MAKE CONNECTIONS
1
Connect the FM tuner to the rear panel AUDIO IN
connectors.
CHOOSE FM BROADCAST
2
Set the FM tuner to the desired broadcast.
SELECT TV PROGRAMME
3
Press TV PROG or the NUMBER keys to select the TV
programme you wish to record.
ENGAGE SIMULCAST
MODE
4
Press SIMUL.
"SIM. ON" will appear on the screen.
START RECORDING
5
Press RECORD on the recorder (or RECORD and PLAY
on the remote control).
NOTES:
If you stop recording with the PAUSE button to avoid
unwanted TV programme material, the audio programme is
also cut.
After finishing simulcast recording, be sure to press the
SIMUL button to cancel the Simulcast mode, otherwise it is
not possible to record on the audio track from the built-in
tuner.
If TV broadcast is interrupted while simulcast recording,
external audio input will not be recorded.
17
EN
Hide quick links:
Advertisement
Table of Contents
