*If you wish to utilize FireWire ports and your computer does not support such interfaces you may be required to purchase an interface as an optional device. You may also utilize your Host (Computer) FireWire 400 port to connect to the FireWire 800 port on Eagleroc E7 via an optional standard cable or a small adaptor.
FireWire cable to the appropriate FireWire port (FW800 or FW400) of your computer and then the other end to the FireWire port in the Eagleroc E7. When using USB, connect one end of the USB cable to the USB port of your computer (or via Power Hub that is connected to your computer) and then the other end to the USB port in the Eagleroc E7.
Need help?
Do you have a question about the EAGLEROC E7 and is the answer not in the manual?
Questions and answers