Notes on Recording
When using both the RF and SCART cables, you can switch between TV and
VCR by pressing the
TV/VCR
Display Tape Position/Time Counter
OK button repeatedly to display the tape position and time counter
Press the
on the TV screen. To reset the time counter, press 0000.
NOTES:
• Set
to
to display the indications on the TV screen. (
OSD
ON
• Depending on the type of tape used, the tape position may not appear right
away.
Change Display Information
OK button repeatedly, you can change the TV screen between
By pressing the
the clock time and the tape position/time counter.
Resetting the Counter
OK button so that the counter display appears on the TV screen.
Press the
While the display is shown, press the
'0:00:00' before starting playback or recording.
Record a Programme While Watching Another
If your VCR is connected to the TV with both the RF cable and 21-pin SCART
cable, press
.
TV/VCR
Once you have started recording all you need to do is use the controls on your
TV set to tune to a different programme. The programme set using the
button on the Remote Control is the one which will be recorded.
button on the Remote Control.
button. You can reset the counter to
0000
basic features
pg. 43)
PR
29