Display Tape Remaining Time; Resetting The Counter; Record A Programme While Watching Another - JVC HR-J580EK Instructions Manual

TV/VCR
AU
1 2
– –:– –
O
3
TV
TV/VCR AUDIO – –:– –
3
1 2
2
4 5 6
VPS/PDC DAILY/QTDN. WEEKLY/HEBDO
7 8 9
0000 AUX 4
0
START STOP
DATE PR
DEBUT FIN
EXPRESS
?
1 PROG 30 SEC
7
0000
TE PR
Notes on Recording
When using both the RF and SCART connections, you can switch between TV
and VCR by pressing the

Display Tape Remaining Time

Press the bbutton so that the tape remaining time is shown on the TV
screen with 'REMAIN' indication. The on-screen information will disappear
after about 5 seconds.
non-standard tapes
accepted by this VCR. In such cases the tape remaining time may not appear
immediately, be incorrect or simply show as '– – : – –'.
Change Display Information
By pressing the bbutton repeatedly, you can change the display on the VCR
between the clock time and the preset position. The preset position cannot be
shown during playback.

Resetting the Counter

Press the bbutton so that the counter display appears on the TV screen.
While the display is shown, press the
'0:00:00' before starting playback or recording.

Record a Programme While Watching Another

Once you have started recording all you need to do is use the controls on your
TV set to tune to a different programme. The programme set using the
button on the Remote Control is the one which will be recorded.
TV/VCR button on the Remote Control.
Sometimes, a tape will not conform to the standards
button. You can reset the counter to
0000
basic features
PR
21