Vlan Setting - Yealink SIP-T28P User Manual

Enterprise IP Phone
Starting IP
End IP
To configure PC Port settings via Phone interface:
1) Press Menu->Settings->Advanced Setting.
2) Enter the password required, scroll to Network option, press Enter softkey, select
PC port option, then press Enter softkey.
3) If you choose Bridge, it will return to the previous menu.
4) If you choose Router, you will be prompted to enter the IP Address, Subnet Mask,
DHCP Server Disable/Enable.
5) Press Save softkey to save the changes, or Cancel softkey to return to the previous
menu.
To configure PC Port settings via Web interface:
Choose Network-> PC Port to do the relating configuration, you can set the starting and
end IP address only via Web interface. You can consult your system administrator for
more information.

VLAN Setting

VLAN is a group of hosts with a common set of requirements that communicate as if
they were attached to the Broadcast domain, regardless of their physical location. The
following table lists the instruction of the field about the VLAN Setting.
Field Name
QoS
Local RTP Port
WebServer
To configure VLAN settings via Phone interface:
1) Press Menu->Settings->Advanced Setting.
2) Enter the password required, scroll to Network option, press Enter softkey, select
VLAN option, then press Enter softkey again.
port will get the IP address automatically between the start IP
address and the end IP address. But if you select the bridge
mode, the DHCP server can not work.
Indicate the range of the IP address
Indicate the range of the IP address
When the network capacity is insufficient, QoS could provide
priority to users by setting the value.
Define the port for voice transmission.
Users can choose the WebServer type: Disable, HTTP, HTTPS, or
HTTPS & HTTP.
- 34 -
Using the Advanced Phone Functions
Description