Turning The Redirect Ring For A Telephone On Or Off - Norstar Modular ICS 7.0 System Manual

Turning the redirect ring for a telephone on or off

You can program a telephone to ring briefly (200
milliseconds) when a call is redirected to one of the lines
assigned to it.
1. Place the programming template over the appropriate
buttons of the programming telephone.
2. Press ≤••¤flfl‹››.
3. Press ¤‹fl›fl (the default System Coordinator
password).
4. Press ≠ and enter the internal number of the
telephone you want to program.
5. Press ≠ twice.
6. Press " three times. The display reads
Redirect ring:.
7. Press CHANGE to select Y (Yes) or N (No).
Tip -
for redirected calls on one of its lines even if another telephone
set up the line redirection.
Displays while redirecting lines
Intercom
Line Redirection
QUIT ADD
N0000626 03
If a telephone has redirect ring enabled, it rings briefly
You selected the intercom button as the
facility to place the call on. Enter a line pool
code or a destination code.
Press • or ADD to begin redirection. Press
REMOVE
£ or REMOVE to cancel a previous
redirection.
Line Redirection / 119
Modular ICS 7.0 System Coordinator Guide