Sony Ericsson K750i Working Instructions page 20

Applicable for K750i & K750c Working Instructions Mechanical
PBA continued
Do not bend the PBA too much upwards!
With the PBA in its raised position, wiggle the board side
to side (if necessary) while pressing it into the system
connector.
Fold down the PBA completely so that its guide hole is
aligned with the guide peg at the top of the frame (1).
Snap the PBA down into the frame.
Make sure that the PBA and the system connector are in
their proper positions and securely locked by the two
hooks (2) on each side of the frame!
Be careful not to damage the camera flexfilm!
Make sure the board-to-board connector on the PBA has
not become broken!
Connect the lower camera flexfilm board-to-board
connector to the PBA with your fingers or with the flexfilm
assembly tool.
Follow the Assembly instructions of section 3.6 – 3.1
3/00021-1/FEA 209 544/94 G 20(44)
©
Company Internal Sony Ericsson Mobile Communications AB