Applicable for K750i & K750c Working Instructions Mechanical
3.5 Plastic Carrier
REMOVAL
Follow the Removal instructions of section 3.1 – 3.4
Be careful not to damage the PBA and the plastic carrier
with the opening tool!
With the front opening tool, gently release the plastic
carrier (not only the metal plate) from the frame.
If necessary, do the same thing on the opposite side.
Bend/lift (1) the plastic carrier no more than 2 mm.
Otherwise it might break and damage may occur to the
board-to-board connector (2)!
Gently bend/lift the plastic carrier until it becomes free
from the PBA using a blunt pair of tweezers (1).
Be most careful when removing the keyfoil board-to-
board connector with the flexfilm assembly tool!
Disconnect the keyfoil flexfilm board-to-board connector
by using the flexfilm assembly tool.
Be careful when removing the plastic carrier!
Lift the plastic carrier straight up and away from the frame.
3/00021-1/FEA 209 544/94 G
13(44)
©
Company Internal
Sony Ericsson Mobile Communications AB