Applicable for K750i & K750c Working Instructions Mechanical
Front continued
ASSEMBLY
Remove the inside protection foil (new front only)!
Do not to scratch the glass with the tweezers!
Use air blow equipment to clean the front glass!
Make sure the keyboard is in its proper position!
Place the front at the top over the frame.
Press the front forward until it snaps onto the top hook.
Then fold down the front against the frame and start to
snap them together.
Gently press with your fingers around the front.
Make sure that there are no gaps around the phone!
if there still is a gap somewhere, gently press the two
halfs together with your fingers!
Apply 18 Ncm torque for the screws using
NTZ 112 288 (torx bit no. 6)!
Tighten two new screws in the frame cavities.
Follow the Assembly instructions of section 3.2 – 3.1
3/00021-1/FEA 209 544/94 G
11(44)
©
Company Internal
Sony Ericsson Mobile Communications AB