Applicable for K750i & K750c Working Instructions Mechanical
PBA continued
With the PBA in its raised position, wiggle the board side
to side while pulling it away from the system connector.
The system connector may become loose when the PBA
is removed!
Be careful not to damage the camera flexfilm!
Gently slide the camera flexfilm trough the hole of the
PBA.
ASSEMBLY
Be careful not to damage the camera flexfilm!
Make sure the board-to-board connector on the camera
has not become broken!
Gently fold the flexfilm to the left (1).
Connect the upper camera flexfilm board-to-board
connector to the camera with your fingers or with the
flexfilm assembly tool.
Be careful not to damage the camera flexfilm!
Gently slide the camera flexfilm trough the hole of the
PBA.
3/00021-1/FEA 209 544/94 G
19(44)
©
Company Internal
Sony Ericsson Mobile Communications AB