Getting Started; Inserting The Batteries - Silvercrest WE-2200 User Manual

Multi-Band Tuner WE-2200

Getting started

You can power the device on either by using the supplied AA-
sized batteries or by using an optional plug-type power adapter
(not supplied). The power adapter must feature a compatible
power plug and output a voltage of 3V.

Inserting the Batteries

Unplug the power adapter cable if there is one connected to the
product. Open the battery compartment cover [8] on the back
panel of the device by sliding it in the direction of the printed
arrow and folding it out. Insert the batteries with the correct
12 - English
This information
characteristics of your device. Different national
regulations may apply in different countries
regarding the frequency bands that are free for
public use. Please note that receiving any
information from bands outside these frequency
bands will be illegal and may be subject to law
enforcement.
Do not use both means of power supply at the
same time. Remove batteries when the device is
to be operated using the power adapter.
describes the technical