Recording; Basic Recording - JVC HR-J270 Instructions Manual

20
EN

Basic Recording

Turn on the TV and select the video channel (or
AV mode).
Recording Resume Function
If there is a power outage during recording, Instant Timer

Recording (

pg. 21) or timer recording (
recording will resume automatically when power is restored
to the recorder unless the recorder's memory backup has
expired.
A
Insert a cassette with the record safety tab intact.
The recorder's power comes on automatically and the counter
is reset to 0:00:00.
B
Press PR +/– or the NUMBER keys to select the channel
you wish to record.
C
Press SP/LP (
recorder's front display panel to confirm the selected tape
speed.
D
Press and hold
press
With HR-J670/671/672/673/674/470/472EU:
B.E.S.T. takes place at the beginning of both the first SP and
the first LP recording after inserting the cassette. (
With HR-J270/272EU:
B.E.S.T. takes place at the beginning of the first recording
after inserting the cassette. (
If "DIRECT REC" is set to "ON", the programme that appears
on the TV screen will be recorded (
E
Press
F
Press
Then press
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
pg. 24, 26), the
Load a cassette.
Choose a programme.
Set the tape speed.
(HR-J670/671/672/673/674/470/
472EU only)
p
). Check the SP/LP indicator on the
Start recording.
7 4
and press
7
on the recorder.
pg. 23)
Pause/Resume recording.
9 4
. Press to resume recording.
Stop recording.
8
on the remote control or
0
to remove the cassette.
RECORDING
on the remote control, or
pg. 23)
pg. 37).
0
on the recorder.
Record safety tab