Show View; Guide Program Number Set - JVC HR-J270 Instructions Manual

S V
HOW IEW
IMPORTANT
Normally, Auto Set Up (
automatically. You need to set the Guide Program numbers manually only in the following cases.
When timer-programming with the S
your recorder, is not selected,
OR
when you add a channel after Auto Set Up or Auto Channel Set has taken place,
—Set the Guide Program number for that station manually.
When you wish to timer-record a satellite programme with the S
—Set the Guide Program numbers for all satellite broadcasts received on your satellite receiver.
Turn on the TV and select the video channel (or
AV mode).

Guide Program Number Set

A
Access the Main Menu screen.
Press MENU.
B
Access the Initial Set screen.
Press to move the highlight bar (pointer) to "INITIAL
rt
SET", then press OK or
e
C
Access the Guide Program Set screen.
Press to move the highlight bar (pointer) to "GUIDE
rt
PROG SET", then press OK or
D
Enter the Guide Program number.
Press to enter the Guide
rt
Program number for the desired
station as shown in the TV
listings. Then press OK or
Setup
®
pg. 8), Preset Download (
V system, the channel position, where the station you wish to record is received on
HOW IEW
.
.
e
.
e
(Example) When inputting the
Guide Program
number 2 for ZDF.
pg. 10) or Auto Channel Set (
V system,
HOW IEW
E
Enter the receiving channel position number.
Press the NUMBER key "0" to
select "TV PROG" or "SAT".
Then press
rt
number of the recorder's
channel position on which the
Guide Program number's
broadcast is received by the
recorder or the satellite
receiver. Then press OK or
To timer-record a satellite
programme with the S
system, you need to install an optional Satellite Controller and
perform the procedure described in "Satellite Receiver Control
Setting" ( pg. 13).
Repeat steps 4 and 5 as necessary.
F
Return to the normal screen.
Press MENU.
Guide Program Number
"Guide Program (GUIDE PROG) number" refers to the
assigned TV station numbers, according to broadcast area,
for the S V
HOW
numbers can be found in most TV listings.
pg. 40) sets the Guide Program numbers
to input the
.
e
(Example) If ZDF is received on
V
HOW IEW
timer recording. The Guide Program
IEW
47
EN
channel position 2.