Table of Contents
Advertisement
Dispensing steam
IMPORTANT: Please note that the main boiler and
the steam boiler CANNOT be operated at the same
time.
o Press the STEAM button. The indicator light will flash
for about 15 seconds. When the indicator light stops
flashing and remains on this shows that the machine
is ready to produce steam.
o Place the water / steam nozzle in a suitable position and place
the container of liquid to be heated below the nozzle.
o You should ensure that the nozzle is fully immersed in the liquid.
o Press and hold the START / STOP button and the
steam will be dispensed. The steam will continue to
flow until you release the button.
o If you are preparing milk for a cappuccino it is recommended
that you agitate the milk for best results.
o IMPORTANT: If the START / STOP button is not pressed
within 10 seconds of the steam being ready, the machine
will cancel the selection.
o WARNING: During this operation, extreme
caution
should
dispensing pipe will get hot.
o When releasing steam, avoid directing the
steam towards your person. There is a
danger of scalding.
be
exercised,
as
the
18
Advertisement
Table of Contents
