Coffee Dispensing; Steam Push-Button; Empty Water Tank; Adjusting The Flow Of Water From The Boiler - Baumatic BEC1SS Installation And Operating Instructions Manual

•
Remove reservoir from cabinet (Fig A-10)
•
Fill up reservoir with fresh water and place back in the cabinet, shut door(Fig A-7)
•
Ensure that the filter (Fig A-5) has been placed in cold water for a few minutes prior to first use.
Fig. D-1, D-2, D-3
If the coffee machine has not been used for long periods of time, change the water in the reservoir.
Starting the Coffee Machine
•
Switch the coffee machine on by switching the on/off button (Fig A-16)
•
The red LED warning light (Fig B-1) will illuminate at the same time the coffee boiler LED (Fig B-2)
will flash indicating the the coffee boiler is heating up.
•
The machine is ready for use when this LED stops flashing and remains on.

6. COFFEE DISPENSING

Press button (Fig B-6) to dispense coffee.
•
Manually Dispensing Coffee: If the button is held down for less than one second, the machine will
dispense coffee. Press the button again to stop dispensing.
•
Automated Fixed Time Coffee Dispensing: If the button is held down for more than one second but
less than five, the machine will dispense coffee for the length of time programmed.
•
Dispensing/programming Time: If the button is held down for more than five seconds, the machine
will dispense coffee for as long as the button is held down. When the button is released, the machine
will memorise the new time it has just calculated (which will subsequently be used by Function B).

7. STEAM PUSH-BUTTON

•
Press key (Fig B-7) to access the steam boiler. LED (Fig B-3) will flash to indicate the machine is
heating up. When it stops flashing and remains on, the machine is ready to release steam.Press key
(Fig B-8) for steam release.
•
Manual steam release: If the button is held down for less than one second, the machine will release
steam. Press the button again to stop this process.
•
Fixed Time Automatic steam release: If the button is held down for more than one second but less
than five, the machine will release steam for the length of time programmed.
•
Steam release/programming: If the button is held down for more than five seconds, the machine will
release steam for as long as the button is held down. When the button is released, the machine will
memorise the new time it has just calculated (which will subsequently be used by Function B). LED
(Fig B-4) lights up to indicate the steam release phase.

8. EMPTY WATER TANK

•
LED (Fig B-5) will illuminate when the tank is empty.
•
All functions will stop automatically, including the steam boiler heating.
•
Fill the tank and reselect the function which had previously been activated.

9. ADJUSTING THE FLOW OF WATER FROM THE BOILER

•
Rotate knob (Fig B-9) anticlockwise from "+" towards "–" in order to decrease the amount of water
which flows out of the coffee boiler. This process is used to make drinks such as tea or tisanes which
require a slower flow of water and less of it.

10. USE OF COFFEE PODS

•
The use of coffee pods (Fig A-14) is an easy, practical and hygienic way to make a coffee. This is
due to the special packaging that avoids coffee coming out and it can easily be removed after use.
•
Switch On the machine (Fig A-16).
6