Table of Contents
Advertisement
o You can also lengthen the pouring time for a larger quantity of
coffee by holding down the START / STOP button within 3
seconds from the end of the preset time. The coffee will keep
pouring until the button is released for up to a maximum of 20
seconds.
Restoring the factory settings
o The coffee machine is programmed at the factory for Italian-
style espresso coffee and German-style regular coffee.
o If changes have been made to the settings and you
wish to revert to the default factory programming, you
must
REGULATION button for about 6 seconds when the
machine is in stand-by mode.
o All of the LEDs, except the ON / OFF button will flash
for 5 seconds and after this the factory settings will be
restored.
o Press the ON / OFF button to begin making coffee using the
default programming.
Using the coffee machine light
o The coffee machine has LEDs for illuminating the dispensing
compartment for easier usage and observation.
o To turn the light on, press the LIGHT button once.
Press this button once again to turn the light back
off.
o The light function is only available when the machine is turned
on and not when it is in stand-by mode.
Warnings
o The coffee machine may display a warning which prompts you to
carry out an action or alerts you to a problem with the machine.
Fill water tank warning
o The machine is equipped with a sensor which detects water in
the water tank.
o If there is no water in the tank, the fill water tank
indicator will light. The coffee machine will not function
until the water tank is filled.
press
and
hold
the
COFFEE
QUANTITY
20
Advertisement
Table of Contents
