Automatic Satellite Programme Recording - JVC HR-J260EK Instructions Manual

20
Automatic
Satellite
Programme
Recording
Satellite Receiver Unit
DECODER
Mains outlet
Back of Recorder
NOTES:
When connecting your recorder to a TV equipped with 21-pin AV input connectors (SCART), follow the illustration above using the
cables shown in grey.
For details, check your satellite receiver's instruction manual.
Outdoor Unit
Satellite Cable
VCR TV
ENTREE/DECODEUR
AV2
IN/DECODER
ADVANCED OPERATIONS (cont.)
This facility allows you to record automatically a satellite
programme which is timer-programmed on your external
satellite receiver. Connect a satellite receiver to the recorder's
AV2 IN/DECODER connector and programme the timer on the
satellite receiver; the recorder starts recording when the signals
input from the satellite receiver to the AV2 IN/DECODER
connector, and when there is no input signals the recorder stops
recording and the power shuts off.
21-pin AV input
connectors (SCART)
Aerial
TV Aerial cable
ANT. IN
RF OUT
ENTREE
ANT. IN
ENTREE/SORTIE
ANTENNE
AV1
IN/OUT
SORTIE
RF OUT
Aerial connector
Back of TV
EXT.2 EXT.1